Table Top Epoxy Resin 1.89 litre - PART B ONLY
Table Top Epoxy Resin - PART B ONLY 1.89 litre
Table Top Artist Epoxy Resin
PREMIUM QUALITY : Our Artko Table Top Resin is ideal for table tops, bar tops, counter tops, artwork, paintings and can be used for any type of coating. It's a high build epoxy, glass like finish, cures crystal clear. It is suitable for pours up to 6mm (1/4"). For thicker applications please use multiple pours.
Crystal Clear Glass effect, No odour, UV stabiliser, Anti-yellowing, heat resistant, self-levelling, scratch resistant, water resistant, no sweating under high humidity, easy to use and mixes perfectly with mica powder and all other epoxy pigments, Easy to use 1:1 ratio, Our customers agree, please see our reviews.
Table Top epoxy resin: Maximum pour depth of 0.6cm (1/4"), when poured, it will self level at approximately 0.3cm (1/8"). This resin is not suitable for Moulds.
Coverage for our 3.78 Litre Kit: Seal Coat 4.5 square mts or 48square ft, Flood Coat 1.5 square mts or 16 square feet.
Artko Table Top Resin 1:1 How to use
1. Mix equal parts of Artko Epoxy Resin 1:1 ratio in a disposable measuring cup or bucket or use silicon mixing cup.
2. Stir slowly for 5-6mins until resin goes clear removing streaky appearance.
4. Then pour into a mould or onto a flat surface and leave to cure .
5. Cure time @ 25 degrees is touch dry 12 hrs and total cure 48 hrs
Tips
1. You can put resin bottles (Part A & Part B) into a warm water for 30 mins before mixing. This helps with bubbles and consistency.
2. You can use a mini prophane torch to burst unwanted bubbles.
3. You can also use a toothpick to burst bubbles that have risen to the surface.